worldwide planet Worldwide Presence

Tips & Tricks - Simulating Mechanical Ventilation using Müse

Share this article


Subscribe to receive updates

At CAE Healthcare, we care about our customers getting the most out of your simulator(s) easily and efficiently. That is why we have started an engaging new Tips & Tricks blog series. This series will cover multiple simulation solutions and will be updated often so don't forget to check back! For easy access to this and Tips & Tricks coming soon for other simulators, click here and subscribe to our RSS feed!

Please note: If you are using Safari 6, you will need to have an RSS Reader downloaded to subscribe.

Tips & Tricks #9 - Simulating Mechanical Ventilation using Müse
If your simulator cannot be placed on mechanical ventilation, you can simulate this by using your Müse software. After the mannequin is intubated, simply set the Respiratory Rate, Tidal Volume, FiO2 and PEEP to the desired values in the software. If you have a ventilator you can connect it to the ET tube without turning it on; if you don’t have a ventilator, you can tape a picture of one to a box or IV pole. Don’t forget to close the simulators eyes, if desired.

The Tips & Tricks section is located in our Resources section on caehealthcare.com. The Resources section of the website will also give you access to important and helpful documentation and video tutorials for your simulators. To access the Resources section, click on "Education" and then "Resources".

We hope you enjoyed this tip! Questions or comments? Please feel free to post below! If you would like more information on utilizing your CAE Healthcare simulator's features, visit the Video Tutorials section.

- The CAE Healthcare Academy