Tips & Tricks - Immediate Flow in Overflow Bottle
At CAE Healthcare, we care about our customers getting the most out of your simulator(s) easily and efficiently. That is why we have started an engaging new Tips & Tricks blog series. This series will cover multiple simulation solutions and will be updated often so don't forget to check back! For easy access to this and Tips & Tricks coming soon for other simulators, click here and subscribe to our RSS feed!
Please note: If you are using Safari 6, you will need to have an RSS Reader downloaded to subscribe.
Tips & Tricks #8 - Immediate Flow in Overflow Bottle
The trauma tanks within iStan are a hard cased tank that contains an internal reservoir or bladder. Occasionally, this bladder will collapse on itself and adhere together, preventing fluids from being pumped into the tank.
- First, perform the draining process to make sure the tank was not left filled with fluid.
- If it appears that the tank is empty, then pump air into the tank following the process outlined in the User Guide.
- Then, try to instill fluids again via the process outlined in the User Guide.
- This may take three attempts at instilling air and fluid before the internal reservoir or bladder opened up.
- If still unable to get the tank to fill— as noted by immediate return of fluid during the fluid instillation process-contact customer service as a technician may be required on site.
The Tips & Tricks section is located in our Resources section on caehealthcare.com. The Resources section of the website will also give you access to important and helpful documentation and video tutorials for your simulators. To access the Resources section, click on "Education" and then "Resources".
We hope you enjoyed this tip! Questions or comments? Please feel free to post below! If you would like more information on utilizing your CAE Healthcare simulator's features, visit the Video Tutorials section.
- The CAE Healthcare Academy
Worldwide Presence
